Advanced Nobø HUB setup

If the search for Nobø HUB in the setup wizard fails, and no HUBs are found, press “advanced” to install the Nobø HUB manually.

For advanced installation, you will need the IP-address allocated to the Nobø HUB on your network. The IP-address can be found by logging on to the router. See your wireless router manual, or ask your internet service provider for more info.

In the advanced setup screen, enter both the IP-address AND the entire 12 digit ID-code from the back of your Nobø HUB, and press “verify”.


If unsuccessful, please check the following:

(only relevant for users with special network configuration)

  • Make sure there is no firewall between your wireless and cabled network (TCP-traffic must be allowed on port 27779.)
  • Make sure your wireless network (connected to the APP) is the same logical local network (LAN) as your cabled network (connected to the Nobø HUB)
  • Make sure your network allows UDP broadcast traffic (on IP, port 10000).